Powersoft T604

6000W/4-channel High-performance Amplifier with DSP and Dante™

Thương hiệu	Powersoft
Âm thanh	amplifier, dsp

Thương hiệu

Powersoft

Âm thanh

amplifier, dsp

Overview

The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end, a WiFi access point at the other end and the amplifiers in-between.

MyPowersoft services are available for this product

Features

The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
Full control with a PC running Armonía.
Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
Group controllable advanced EQ with raised cosine filters
Large preset library
Preset compatibility with X Series
Very long FIR filters (42.6 ms)
Control and monitoring through ArmoníaPlus

Specifiche

General
Output power per channel
Output power per channel	1500W @ 2 Ω	1500 W @ 4 Ω	1250 W @ 8 Ω
Bridge mode		3000 W @ 4 Ω	3000 W @ 8 Ω
Max output voltage / current
Max unclipped output voltage @8 Ω			145 Vpeak
Current			50 Apeak
AC main power
Power supply	Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement			100-240 V ±10%, 50-60 Hz
Operating voltage			90 V – 264 V
Power consumption / Current draw
1/8 of max output power @ 4 Ω		120 V: 1054 W – 9.5 A	230 V: 1027 W – 5.2 A
THERMAL
Thermal dissipation
1/8 of max output power @ 4 Ω		120 V: 1039 BTU/h	230 V: 944 BTU/h